|
|
|
| Zigbee Wing | bpw5004-zigbee | BPW5004 - Wing with Maxstream XBee module adapter for Zigbee communications. |
| Wiznet SPI Ethernet Wing | bpw5010-wizeth | BPW5010 - Wiznet Ethernet Wing derived from the Arduino Ethernet Shield. |
| Voltage Buffer Wing | bpw5009-buffer | BPW5009 - Provides 32 bits of buffered lines that can be selected as inputs or outputs. |
| USB Cocoon | usbcocoon | Provides power, USB, and JTAG to FPGA and CPLD Cocoon modules. |
| Sump Pump | butterflylogic | Collaboration between Gadget Factory and DangerousPrototypes.com to create a low cost and standalone Logic Analyzer. |
| Stepper Controller Core | stepper_core | This project intends to develop a HDL core for stepper controller applications providing register-based interface to a microcontroller or microcontroller core. It will be compliant with Wishbone peripheral bus and have a generic bus interface to connect it to other internal microcontroller busses as well. |
| SPI Flasher | spi_flasher | Flash SPI Flash attached to Xilinx FPGA's.
Design is adapted for Butterfly Platform from Xilinx Spartan 3E Reference design. |
| SPI ADC with Signal Conditioning | adc-signal | This project aims to make a 2-channel ADC Wing, with onboard signal conditioning that can take few signals from millivolts to 18V and scale/shift them to levels that can be read by the ADC. |
| SPI ADC Wing | bpw5011-spiadc | BPW5011 - A SPI based ADC Wing. |
| S3E FPGA Cocoon | s3ecocoon | An open source, modular FPGA design which can be used for the core of many flexible applications. |
| REDe Multi-Peripheral Core | rede_mpc | The REDe Multi-Peripheral core consolidates all of the available GadgetFactory peripheral core into one easily addressable multi-core. With the addition of a processor core this forms a full REDe solution. |
| PWM Controller | xilinx_pwm | 12 Channel PWM controller |
| Power Cocoon | cocoon_power | Cocoon to provide Power to other Cocoons such as the Spartan 3E Cocoon. This is a low cost solution. |
| PAVR - AVR Virtual Processor | pavr | This Soft Processor is not currently operational. Take a look at the AVR8 processor for an operational Soft Processor.
An AVR compatible Virtual Processor.
The PAVR is more capable than the AX8 AVR compatible Virtual Processor. |
| Mouse and Keyboard Wing | bpw5006-ps2 | BPW5006 - Two PS/2 Connectors for Mouse and Keyboard Wing. |
| MicroSD Wing | bpw5002-usd | BPW5002 - Wing that implements a SPI based MicroSD card. |
| Logic Analyzer | lax | Logic Analyzer for the Butterfly Platform hardware based on open source design at sump.org. |
| LED/Button Wing Core | core_led_button | An IP core for the BPW5007 Button/LED Wing. Allows the Button/LED Wing to be used with stand alone HDL or a REDe core. |
| LCD Wing | bpw5003-lcd | BPW5003 - HD44780 compatible LCD Wing. |
| Infrared Wing | bpw5008-ir | BPW5008 - Provides a 4MBit/s Irda Module, IR emitter, and IR Receiver. |
| Gadget Factory General | gf_general | Location for Gadget Factory General information. |
| Eclipse avr-gcc Plugin | eclipse-avr-gcc | An Eclipse plugin to develop with avr-gcc based Soft Processors such as the AVR8. |
| DSO Wing | dsowing | Wing to provide DSO capabilities. |
| Buttons and LED's 4 Wing | bpw5007-butnled | BPW5007 - Wing with Four Buttons and Four LEDs. |
| ButterFly Platform | butterfly_main | Open Source FPGA and CPLD development platform. |
| Butterfly Loader | butterflyloader | Software to load finished designs onto the Butterfly hardware.
Load Xilinx bitstream (*.bit) files and svf files onto the Butterfly hardware. |
| Butterfly Light | butterflylight | BPC3000 - Butterfly Light Combo is the USB Cocoon and S3E Cocoon stacked together in their simplest form.
The Butterfly Light does not have Wing capability by itself but can be upgraded to the Butterfly Full. |
| Butterfly Flight | butterflyflight | The Butterfly Flight introduces the concepts of "Wings". Wings are a standardized peripheral scheme that allows peripherals to be easily attached to the development platform.
The Butterfly Flight is made up of the USB Cocoon, the Spartan 3E Cocoon, and theSpartan 3E Wing Adapter. |
| Basic project with SVN support | svn_project | Basic template project with SVN support |
| AVR AX8 Processor | avr_ax8 | An 90S1200 and 90S2313 compatible AVR clone. Compatible with avr-gcc tools for C programming capability. |
| AVR/Arduino Wing | bpw5001-avr | BPW5001 - AVR and Arduino Pro Mini compatible Wing adapter. |
| AVR/Arduino Core | core_avr_wing | VHDL core to allow the BPW5001 AVR/Arduino Tech Adapter Wing to act as a master for the REDe Multi-Peripheral Core. |
| AVR8 Virtual Processor | avr_core | Virtual Processor - An 8-bit soft core that is compatible with the AVR ATmega103. Includes support for the avr-gcc toolchain for programming in C. This core is also known as AVR8. |
| 1-Axis Stepper Controller Wing | stepper1 | BPW5005
This is a Single-axis Stepper Motor Controller Wing for use with bipolar stepper motors rated up to 35V and 2.5A, based on Allegro A3979 chip.
It has a parallel command interface with enable, direction, step and other signals. It also supports microstepping in half, quarter or sixteenth step.
Please see: http://www.allegromicro.com/en/Products/Part_Numbers/3979/index.asp
This Wing uses a 8-bit segment of the S3E Cocoon.
|
|
To search for projects, please enter the criteria in the text box and press "Search" to get the results
